Private Label Niacinamide Azelaic Acid Serum Manufacturer

What is the formulation process and key ingredients in a niacinamide azelaic acid serum?

By Blake Mereby · Last reviewed October 3, 2026

A niacinamide azelaic acid serum is a lightweight, emulsion-free concentrate designed for fast absorption and minimal irritation, typically 30–50 mL, with a target composition of 80–90% water and hydrophilic (water-loving) ingredients, 5–10% actives (including niacinamide and azelaic acid), and 5–10% supporting ingredients (preservatives, humectants, chelators, pH buffers, and optional boosters like allantoin or squalane). The formulation process spans four stages: pre-formulation research, formula design and lab trials, stability and safety validation, and manufacturing scale-up.

Pre-formulation starts with understanding your actives' chemical behavior. Niacinamide (Vitamin B3, INCI: Niacinamide) is water-soluble, pH-stable (works well at pH 3–7), and relatively non-irritating at 5% concentration, though some users report transient flushing at >10%. Azelaic acid (INCI: Azelaic Acid) is lipophilic (fat-loving) and highly pH-sensitive; it's most soluble and stable at pH 3–4, but at higher pH or over time it can crystallize or separate from solution. A serum combining both must be formulated at a target pH of 3.5–4.5, achieved with citric acid or sodium hydroxide, to keep azelaic acid dissolved while maintaining niacinamide's benefits. This pH range is gentle enough for sensitive skin but acidic enough to be irritating if not buffered properly—a critical balancing act your manufacturer must execute.

The water base (60–75% of the formula) is typically purified water or distilled water, sometimes with glycerin (5–10%) as a humectant to draw moisture into skin and boost product feel. Some formulas add propylene glycol (2–5%) as a co-solvent and humectant, which helps dissolve azelaic acid and improves penetration, but can be irritating to very sensitive skin, so concentration matters. Hyaluronic acid (0.5–1.5%) adds hydration marketing appeal and thickens the formula slightly without feeling heavy.

Key supporting ingredients: A preservative system is non-negotiable. Azelaic acid alone has mild antimicrobial activity, but a serum with water content and a low pH is still vulnerable to bacteria and fungi. Common choices are phenoxyethanol (1–2%), a combination of sodium benzoate and potassium sorbate (1% total), or a newer preservative blend like Euxyl PE 9010 (1–1.5%). Your manufacturer will run a Preservative Challenge Test (PCT) to confirm the chosen preservative prevents microbial growth across 6–12 months of storage.

Chelators like disodium EDTA or tetrasodium EDTA (0.05–0.1%) bind trace metals that can degrade azelaic acid or discolor the serum over time—a often-overlooked ingredient that's critical for stability. A buffer system (sodium acetate, citric acid, or sodium citrate) maintains pH in the target 3.5–4.5 range; the exact blend is determined during lab trials based on the water hardness and mineral content of your facility's water.

Optional boosters often include allantoin (0.5–1%) for a soothing, wound-healing feel (marketed as anti-irritation support for a low-pH serum); niacinamide often pairs well with allantoin because it feels more comfortable to sensitive users. Some formulas add centella asiatica extract (1–3%) or panthenol (1–2%) to further cushion the acidity. Squalane (2–5%) can be added for occlusion and a silkier feel, though it may reduce the perception of "light" serum, so it's optional.

Formula design and lab trials follow. The manufacturer starts with a bench formula (a small 100–500 mL batch), mixes the ingredients in sequence (preservatives dissolved in water first, then actives, then boosters), and tests for phase separation (is the azelaic acid staying dissolved?), viscosity (target is usually 5–15 cPs at 25°C for a serum feel), and initial pH (confirm it's 3.5–4.5). If separated or off-spec, they adjust solvent ratios or add a co-solvent like propylene glycol and re-test. This round-trip takes 2–4 weeks, depending on your responsiveness to samples.

Once the formula is locked, stability and safety validation begins in parallel with manufacturing setup. The lab fills the formula into the final packaging (glass dropper bottle is typical, as plastic can interact with low-pH formulas over months) and tests at room temperature (20–25°C), refrigeration (4°C), and accelerated conditions (40°C, 75% humidity) over 90 days. They measure pH, viscosity, appearance (color, clarity, separation), and active concentrations (via HPLC—High Performance Liquid Chromatography) to confirm azelaic acid and niacinamide remain stable. Preservative Challenge Testing (introducing a known pathogen, typically Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Aspergillus brasiliensis, and Candida albicans, and confirming the serum kills or inhibits them over 28 days) must also pass.

Manufacturing scale-up to your MOQ proceeds once formula and testing are approved. The lab scales up from 500 mL to 10–50 liters (depending on your MOQ), maintains the same ingredient sequence and mixing times, and fills into bottles using an automated or semi-automated line. Temperature control during mixing is critical for azelaic acid stability; the formula is typically mixed at 25–35°C, never exceeding 40°C. Filled bottles are capped, labeled, and quarantined for final QA testing (pH, viscosity, microbiology, active concentration check) before release.

Common formulation mistakes: (1) Too-high azelaic acid concentration (>12%) without sufficient propylene glycol or other co-solvent, leading to crystallization after a few weeks on the shelf. (2) Insufficient buffering capacity, so pH drifts upward over time and azelaic acid precipitates. (3) Wrong preservative choice (e.g., methylisothiazolinone, which is banned in rinse-off products in some regions and can degrade at low pH). (4) Skipping or under-running stability testing, so the serum looks fine in the lab but separates in customer fridges or hot warehouses. (5) Not testing the final product in the actual packaging—a serum formula stable in glass may interact negatively with plastic or aluminum over months.

Ingredients in this answer: Azelaic Acid · Niacinamide · Allantoin · Squalane · Sodium Hydroxide

Read the full guide on Private Label Niacinamide Azelaic Acid Serum Manufacturer →

More about Private Label Niacinamide Azelaic Acid Serum Manufacturer

Tell us about your product

Tell us what you want to create and we'll set you up on AJ Cosmo Labs with your idea loaded — your first AI formulation is free.

Free to start · no credit card · continue in your browser or the iPhone app.

Have a product idea?

Connect with vetted cosmetic chemists and custom labs on AJ Cosmo Labs.

Get on the App Store Open the web app