Private Label Tranexamic Acid Kojic Acid Underarm Cream

How do I validate that tranexamic acid and kojic acid remain stable and effective in my underarm cream throughout shelf life?

By Blake Mereby · Last reviewed October 5, 2026

Validating stability and efficacy of tranexamic acid and kojic acid in your underarm cream requires three phases: bench-top formulation testing during development, accelerated stability testing per international standards, and optionally consumer or clinical validation studies. Real stability testing typically spans 8–16 weeks for accelerated conditions (40°C/75% RH) and 12 months for real-time room temperature storage; this is not optional if you're claiming efficacy or making "brightening" promises on the label. The goal is to ensure your active ingredients do not degrade, your preservative system remains effective, and the product maintains its sensory and chemical properties (appearance, odor, viscosity, pH) for the entire labeled shelf life. Without this data, you risk launching a product that separates, oxidizes, or loses potency mid-shelf, damaging your brand and creating regulatory exposure.

During the formulation development phase (weeks 2–4 of your project timeline), the cosmetic chemist performs bench-scale trials using high-performance liquid chromatography (HPLC) or UV-Vis spectroscopy to measure tranexamic acid and kojic acid concentration in freshly prepared micro-batches. They will also assess the formulation's pH drift over 24–48 hours, because tranexamic acid is highly susceptible to hydrolysis in aqueous systems. If pH rises above 5.5, tranexamic acid begins to degrade; if it falls below 4.0, some surfactants or emulsifiers may destabilize. A proper bench-test includes: (1) Measuring initial pH (target: 4.5–5.5 for tranexamic acid stability). (2) Retesting pH after 24 hours at room temperature and at 40°C to detect acidification or alkalinization. (3) Visual inspection for phase separation, color change (especially critical for kojic acid, which turns brown if oxidized), or odor shift. (4) Optional HPLC or UVVIS measurement of active concentration after 24 and 48 hours to quantify any early degradation. The chemist will tweak the buffer system (usually citric acid, sodium citrate, or acetate buffers) and preservative package until pH remains stable; this iterative cycle typically takes 1–2 weeks. Skipping bench-testing and going straight to a micro-batch production run delays the project by 3–4 weeks if issues emerge at scale.

Once the formula is locked, a micro-batch (2–5 kg) is produced in the co-packer's GMP facility and filled into the intended packaging (airless jar, pump bottle, tube, etc.). This pilot batch is subject to accelerated stability testing per the International Cosmetic Ingredient Dictionary and Standards or ICH (International Council for Harmonisation) Q1A/Q1B guidelines, which most cosmetic labs adopt. The accelerated protocol places filled, sealed samples in a climatic chamber at 40°C ± 2°C and 75% relative humidity ± 5% RH for 4 to 8 weeks (sometimes 12 weeks for high-risk actives). Samples are withdrawn at weeks 0 (baseline), 1, 2, 4, and 8; each timepoint is analyzed for: (1) Physical appearance (color, consistency, separation, mold/mildew growth). (2) pH (must stay within target range, e.g., ± 0.5 units from initial). (3) Viscosity (typically within ± 10% of initial for a cream). (4) Active ingredient concentration (HPLC or spectroscopy) to confirm tranexamic acid and kojic acid loss is below acceptable limits, usually defined as no more than 10% loss over 8 weeks at accelerated conditions, which extrapolates to minimal loss over 2 years of real-time storage. (5) Microbial content (aerobic plate count, yeast/mold, objectionable organisms per ISO 21149 or USP methods) to ensure preservative efficacy. (6) Water activity (optional, but relevant if you suspect moisture uptake) and viscosity (optional, but important for pump or bottle flow consistency).

In parallel with accelerated testing, real-time stability samples are stored at room temperature (20–25°C, <60% RH) and subjected to the same analyses at weeks 0, 2, 4, 8, 12, and then monthly through 12 months. Real-time data is the gold standard for regulatory compliance because it reflects actual consumer storage conditions; accelerated data is predictive but cannot fully account for real-world factors (temperature fluctuations, light exposure, humidity cycling). Regulations in most markets (US FDA, EU CPNP, NMPA) accept 4–8 weeks of accelerated data as a preliminary safety indicator, but prefer or require 12 months of real-time data before a final shelf-life claim. If you're launching quickly and cannot wait 12 months, you can file for approval with accelerated data alone (declaring a conservative, shorter shelf life, e.g., 6 months), then update the shelf-life claim once 12-month data arrives; this is a common practice among indie brands and is acceptable to regulators provided you inform consumers of the initial conservative shelf life in your launch marketing.

Microbial challenge testing (preservative efficacy testing) per ISO 11930 is critical for tranexamic acid and kojic acid creams because both actives and water-based emulsions are susceptible to microbial contamination; a compromised preservative system leads to mold (visible growth), bacterial overgrowth (odor and pH shift), or yeast, all of which accelerate active ingredient degradation. In ISO 11930, your product is deliberately inoculated with standardized cultures of bacteria (Staphylococcus aureus, Pseudomonas aeruginosa), fungi (Candida albicans), and mold (Aspergillus brasiliensis) at high levels (typically 10^7 CFU/ml). The microbial count is then tracked over 4 weeks of storage (often at 20–25°C and sometimes at 37°C for higher sensitivity). A passing result shows that the preservative system kills or inhibits all inoculated organisms, reducing viability by 99.9% or more within defined timeframes (usually 2–4 weeks). If your preservative system fails this test, the formulation is reformulated with a different preservative or higher concentration until ISO 11930 is passed. This is expensive (ISO 11930 testing costs $1,500–$3,000 per product) and takes 4 weeks, but it is non-negotiable for any water-based cream claiming multiple weeks of shelf life; skipping it exposes you to product recalls, consumer safety issues, and regulatory enforcement.

Optional but valuable: In-vitro efficacy testing (melanin inhibition assays or tyrosinase inhibition assays) confirms that your tranexamic acid and kojic acid remain biologically active. These assays measure the ability of a diluted, extracted sample from your finished product to inhibit tyrosinase enzyme or reduce melanin production in cell culture; the results are compared to a baseline (freshly formulated product) and to a positive control (e.g., pure tranexamic acid at the same concentration in a simple aqueous buffer). If real-time samples at 6 or 12 months show significant loss of efficacy (e.g., >15% reduction in tyrosinase inhibition), the active ingredient or emulsion chemistry has degraded faster than expected. This early warning lets you shorten your declared shelf life or reformulate before consumer complaints arrive. In-vitro testing costs $1,500–$2,500 per timepoint; many indie brands conduct this at baseline and 6 months to verify the trajectory. On the AJ Cosmo Labs platform, your co-packer can coordinate in-vitro testing through affiliated third-party labs, ensuring results are independent and defensible for marketing claims.

Cold-chain and light exposure studies are optional but increasingly important for tranexamic acid and kojic acid, which are sensitive to oxidation and temperature. Some brands conduct supplementary testing at cooler conditions (e.g., 2–8°C) or in light-exposed storage (exposed to indirect sunlight or standard fluorescent light for 4–8 weeks) to verify no accelerated degradation. If your product is marketed as premium or cosmeceutical, these data reinforce quality perception and can justify a higher shelf-life claim or label recommendations ("store in a cool, dark place").

Documentation and regulatory reporting: All stability data (HPLC chromatograms, pH logs, viscosity records, microbial results) must be compiled into a Stability Summary or included in your Product Information File (PIF) for EU CPNP notification or Safety Assessment File (SAF) for cosmetics marketed in multiple regions. In the US, the FDA does not require pre-submission of stability data, but you must retain it for three years on-site and produce it if audited. In China (NMPA), stability data is requested as part of the import cosmetics registration. Presenting your stability data clearly (with tabulated results and graphed trends) demonstrates professionalism and can accelerate regulatory review.

Common stability challenges and how to address them: (1) Tranexamic acid pH-drift: Add a buffering system (sodium citrate + citric acid) tuned to pH 4.5, and use a preservative that stabilizes pH (phenoxyethanol helps). (2) Kojic acid browning: Substitute kojic acid dipalmitate (more stable) or add antioxidants (alpha-tocopherol, sodium ascorbate, or chelating agents like EDTA) and package in opaque or amber-colored bottles to block light. (3) Separation or texture change: Optimize the emulsifier system and ensure water phase is below 50% by weight; add thickeners (xanthan gum, carbomers) to stabilize texture if needed. (4) Microbial challenge failure: Increase preservative concentration or switch to a broad-spectrum preservative blend; some formulators add paraben-free blends (e.g., Glydant Plus, Euxyl PE 9010) that perform better in actives-rich formulations. (5) Odor or discoloration: Reduce fragrance concentration (perfume oils can oxidize and turn formulations yellow), avoid raw materials with high microbial loads (inspect supplier CoA for aerobic plate count <10^3 CFU/g), and store stability samples away from direct light.

Timeline reality: A full stability package (8-week accelerated + 12-week real-time preliminary + ISO 11930 + optional in-vitro at weeks 0 and 6) takes 12–16 weeks from micro-batch production. If you're launching within 3–4 months, you can submit 8-week accelerated data + 4-week real-time + ISO 11930 to regulators and declare a conservative shelf life (6–8 months), then update your label and marketing once 12-month data confirms longer shelf life is safe. Many indie brands do this; it's a standard practice and does not trigger regulatory concern provided you're transparent. On the AJ Cosmo Labs app, your co-packer and QA partner can schedule stability timepoints to align with your launch date and provide preliminary reports early, keeping you on track.

Ingredients in this answer: Tranexamic Acid · Kojic Acid · Citric Acid · Phenoxyethanol · Xanthan Gum

Read the full guide on Private Label Tranexamic Acid Kojic Acid Underarm Cream →

More about Private Label Tranexamic Acid Kojic Acid Underarm Cream

Tell us about your product

Tell us what you want to create and we'll set you up on AJ Cosmo Labs with your idea loaded — your first AI formulation is free.

Free to start · no credit card · continue in your browser or the iPhone app.

Have a product idea?

Connect with vetted cosmetic chemists and custom labs on AJ Cosmo Labs.

Get on the App Store Open the web app