A basic double cleanse oil formula typically contains 4–8 core ingredients: carrier oils (the main cleansing and conditioning phase), an optional emulsifier or surfactant (if you want a milky or rinse-able formula rather than pure oil), a preservative system (if water is present), optional actives or botanicals (for claims or brand positioning), and fragrance or essential oil (for scent). The exact ingredient list depends on whether your formula is anhydrous (oil-only, no water) or emulsified (oil + water), and whether it's designed to rinse off with water or be wiped away with a cloth.
Carrier oils are the hero: common choices include squalane (lightweight, non-comedogenic, from olive or synthetic sources), jojoba oil (similar to skin sebum, balancing), sunflower oil (rich in linoleic acid, good for barrier function), sweet almond oil (light, fast-absorbing), avocado oil (heavy, conditioning, rich), and neem or rosehip oil (for their specific actives or marketing story). A formulae often blends 2–4 oils to balance texture, absorption rate, and skin feel. Squalane + jojoba is a classic duo because squalane is silky and fast while jojoba is more occlusive. A high-end formula might be squalane + jojoba + sunflower + a touch of argan, creating a luxurious feel with proven skin benefits. Most indie founders want to include rare or trendy oils (like marula, camellia, or tamanu), and a good cosmetic chemist will help you source them and validate their stability in your formula; these ingredients cost more (2–5x the cost of squalane) and may have longer lead times if not in stock with major suppliers.
For a double cleanse oil that rinses with water, you need an emulsifier to make the formula milky and separable. Common emulsifiers include polysorbate 80 (mild, INCI: Polysorbate 80, around 3–8% of the formula), polyglycerol oleate (a natural-derived polymer emulsifier), or newer plant-based emulsifiers like Lecithin or BTMS (behentrimonium methosulfate, a cationic conditioning emulsifier — not a polymer). These emulsifiers work by allowing oil and water to blend temporarily when you massage the product on your face; as you rinse with water, the emulsion breaks and the oil rinses away. A cosmetic chemist will test which emulsifier works best for your oil blend because some emulsifiers are better with lighter oils and others with heavy oils. If you want a gel-like double cleanse (trending in Korean beauty), you may need a hydrophilic polymer like Xanthan Gum or Carbomer instead of a traditional emulsifier; these cost less but require more careful pH and viscosity tuning.
Preservative systems are critical if your formula contains water. Even a 1–2% water phase requires broad-spectrum preservatives to prevent bacterial and fungal growth. Common preservative blends include Phenoxyethanol + Methylisothiazolinone (MIT), Phenoxyethanol + Parabens, or newer alternatives like Sodium Benzoate + Potassium Sorbate (if your pH allows). If you're marketing as "clean" or "natural," preservative options narrow: some brands use Radish Root Ferment Filtrate or Glucose Oxidase (enzyme-based), but these are less effective and may not be approved in all regions. A pure, anhydrous oil formula (no water) needs no chemical preservative, which is a huge selling point for indie brands; however, oils oxidize over time and may need a small amount of Vitamin E or Rosemary Extract (a natural antioxidant) to extend shelf life. EU regulations limit some natural antioxidants, so a chemist must verify compatibility with your target market.
Optional active ingredients add value: Niacinamide (anti-inflammatory, 2–5%), Vitamin C (brightening, but unstable in oil—requires stabilization), Hyaluronic Acid (hydration, in the water phase if emulsified), or plant extracts like Green Tea, Chamomile, or Turmeric (antioxidant, anti-inflammatory). Each active adds cost, complexity (stability testing required), and potential claim support (you may need a third-party study or literature review to justify a benefit claim). Many indie brands oversell the benefits of their actives; a cosmetic chemist will rein you in and help you make only defensible claims supported by evidence.
Fragrance is often 0.5–2% of the formula. A synthetic fragrance blend (created by a perfumer specifically for your brand) costs $500–$3,000 and requires MOQ commitments from the fragrance supplier. Essential oils are often cheaper upfront but are less stable in oil formulas, may not provide a consistent scent, and can be allergenic if used at high levels. Many indie founders choose a fragrance, fall in love with the story, and only later discover the fragrance supplier requires a 50 kg minimum order that forces their co-packer to increase MOQ. A cosmetic chemist will flag this constraint early if you ask.
Raw material sourcing and costs: Squalane runs $8–$15 per liter depending on source (plant-derived vs. synthetic) and purity. Jojoba is $12–$20 per liter. Polysorbate 80 is $5–$10 per liter. A custom fragrance can be $2,000–$10,000 per kilogram depending on the perfumer's reputation. If your MOQ is 1,000 units at 200 mL each, that's 200 liters of finished formula. If your formula is 70% squalane + 20% jojoba + 5% emulsifier + 3% preservative + 2% fragrance, your COGS for raw materials is roughly (0.70 × $10 + 0.20 × $15 + 0.05 × $7 + 0.03 × $4 + 0.02 × $5,000 per kg ÷ 1,000) = $9–$11 per liter, or roughly $1.80–$2.20 per 200 mL unit. This doesn't include packaging, manufacturing labor, or overhead. A cosmetic chemist will provide a detailed cost breakdown and INCI list so you can source raw materials and have a realistic COGS for pricing and profitability modeling.
Ingredients in this answer: Linoleic Acid · Jojoba Oil · Squalane · Behentrimonium Methosulfate · Polysorbate 80
Read the full guide on How to Find a Cosmetic Chemist for Double Cleanse Oil →